Images are for illustrative purposes only. Actual product may vary.
KOYO HK1416-2RS Needle Roller Bearing 14x20x16mm (Open End, Double Seal (2RS))
KOYO HK1416-2RS drawn cup needle roller bearing, open end, double seal (2rs). Bore 14mm, OD 20mm, width 16mm.
Product successfully added to the Quote List
- Drawn cup (shell type) needle roller bearing - thin-walled deep-drawn outer shell forms the raceway
- Fitted with double seal (2rs) for lubricant retention and contamination exclusion
- High radial load capacity from the needle roller complement
- Koyo (JTEKT) precision manufacture to JIS standards
- Lowest sectional height of any needle roller bearing for a very compact arrangement
- Maximum operating temperature approximately 140C
- Open ends (standard type) with a narrow flange gap to retain grease and exclude contaminants
- Press-fit into the housing bore - no axial location fixtures required
- Use with a hardened shaft or JR10x13x12.5 inner ring as the inner raceway
| Brand | Koyo JTEKT |
|---|---|
| Bearing Type | Drawn Cup Needle Roller Bearing |
| Series | HK |
| Measurement System | Metric |
| Inner Diameter (Bore) | 14 mm |
| Outer Diameter | 20 mm |
| Width | 16 mm |
| Configuration | Open End |
| Seal Type | Double Seal (2RS) |
| Material | Chrome Bearing Steel |
| Dynamic Load Rating (Cr) | 7170 N (7.17 kN) |
| Static Load Rating (C₀) | 8410 N (8.41 kN) |
| Limiting Speed (Grease) | 14000 rpm |
| Fillet Radius (r min) | 1 mm |
| Compatible Inner Ring | JR10x13x12.5 |
| Weight | 0.014 kg |
| Features & Benefits | Drawn cup (shell type) needle roller bearing - thin-walled deep-drawn outer shell forms the raceway Fitted with double seal (2rs) for lubricant retention and contamination exclusion High radial load capacity from the needle roller complement Koyo (JTEKT) precision manufacture to JIS standards Lowest sectional height of any needle roller bearing for a very compact arrangement Maximum operating temperature approximately 140C Open ends (standard type) with a narrow flange gap to retain grease and exclude contaminants Press-fit into the housing bore - no axial location fixtures required Use with a hardened shaft or JR10x13x12.5 inner ring as the inner raceway |
The KOYO HK1416-2RS is a drawn cup (shell type) needle roller bearing with open ends, for a 14mm shaft (metric series). Its thin-walled, deep-drawn outer shell forms the outer raceway, giving the lowest sectional height of any needle bearing while carrying high radial loads in a compact, economical package. Boundary dimensions 14 x 20 x 16mm.
The open-end (standard) type has a narrow flange gap that helps retain grease and exclude contamination. This variant has double seal (2rs) for retained lubrication and contamination exclusion in service. The bearing is press-fitted into the housing bore, so no axial location fixtures are needed; maximum operating temperature approximately 140C. Use with a hardened shaft or the JR10X13X12.5 inner ring as the inner raceway. Manufactured by Koyo (JTEKT), Japan.
Substitute Products
-
TLA1416UU
IKO TLA1416UU Needle Roller Bearing 14x20x16mm (Open End)
14 mm × 20 mm × 16 mm
Product successfully added to the Quote List
-
TLAM1416
IKO TLAM1416 Needle Roller Bearing 14x20x16mm (Closed End)
14 mm × 20 mm × 16 mm
Product successfully added to the Quote List
-
TLA1416Z
IKO TLA1416Z Needle Roller Bearing 14x20x16mm (Open End)
14 mm × 20 mm × 16 mm
Product successfully added to the Quote List
-
6824ZZC3
KOYO 6824ZZC3 Deep Groove Ball Bearings
120 mm × 150 mm × 16 mm · ZZ · C3
Product successfully added to the Quote List
-
6822ZZC3
KOYO 6822ZZC3 Deep Groove Ball Bearings
110 mm × 140 mm × 16 mm · ZZ · C3
Product successfully added to the Quote List
-
6916ZZC3
KOYO 6916ZZC3 Deep Groove Ball Bearings
80 mm × 110 mm × 16 mm · ZZ · C3
Product successfully added to the Quote List
-
6916-2RSC3
KOYO 6916-2RSC3 Deep Groove Ball Bearings
80 mm × 110 mm × 16 mm · 2RS · C3
Product successfully added to the Quote List
-
6915ZZC3
KOYO 6915ZZC3 Deep Groove Ball Bearings
75 mm × 105 mm × 16 mm · ZZ · C3
Product successfully added to the Quote List
We Help You Find It
Not sure what you need? Our Brisbane-based team actively help customers to identify parts — bring it in, send a photo, or just give us a call.
Bring It In
Walk into our Brendale store with the old part. We'll measure it, match it, and get you sorted on the spot.
Unit 2/348 S Pine Rd, Brendale QLD 4500 Get DirectionsSend a Photo
Snap a photo of the part — include something for scale. Upload it here or email it and we'll identify it for you.
email us Or Upload PhotoCall Our Experts
Tell us what you need over the phone. Our experienced team can identify most parts from a part number, dimensions, application, or even a simple description.
Call (07) 3889 6200
There are no reviews yet.